If you require the best brake pads for Toyota Tacoma, you can count on our insightful review. The primary function of any brake pad is to help bring a car to a halt by creating friction.
So, if you desire a noiseless, smooth, and safe ride on the road during the day or night, you need the best brake pad.
However, there are many decent brake pad options on the market, making it difficult to find the best one.
Not to worry, this review will help you find the ideal one. Let’s get started.
Comparison Table for the Best Brake Pads for Toyota Tacoma
What is the Best Brake Pad for Toyota Tacoma?
After our thorough research, we can strongly recommend Power Stop K137as the best brake pad for Toyota Tacoma on the market.
Power Stop K137-36 is another excellent alternative to opt for if our top choice is not available.
Why Power Stop is the Best Brand for Brake Pads for Toyota Tacoma?
We picked Power Stop as the best brand because their brakes are designed to provide adequate braking power on any wet road without fading after the usage for a long time.
Additionally, the brake kits are fitted with brake lubricants that prevent the brakes from making screeching noises and possible wear and tear.
Our Top Picks of Brake Pads for Toyota Tacoma
1. Power Stop K137 – Overall Best Brake Pads
- Two Front Rotors
- Includes Front Brake Pads
- Ceramic Pads
- Slotted and Cross-Drilled Rotors
- Evolution Sport Ceramic Pads/Carbon Fiber
- Easy-to-install pre-matched components
Are you searching for a brake kit that will enhance your truck’s braking power? Then, this Power Stop brake kit is a great option to consider.
These brake pads are noise-free, dust-free, and provide enhanced braking power without taking away the driving comfort.
The precision drill holes in this brake kit give a maximum cooling effect to the rotor. This reduces the temperature of the brakes during intense operating situations.
Power Stop K137 rounded slots is another excellent addition that aids the wiping away of debris or gas, which keeps the contact patch on the rotor’s surface clear, making braking smooth and safe.
The application of Silver Zinc Dichromate plating to all slotted and drilled rotors helps prevent corrosion and rust. Power Stop K137 provides noise-free braking without the need for brake dust.
It is designed to provide swift and low-cost braking solutions making it easier to boost your truck’s braking power at an affordable price.
Power Stop K137 consists of a full set of high-performance Evolution sport Ceramic Pads/ Carbon Fiber, ideally matched slotted and drilled rotors, high-performance lubricant, and upgraded hardware.
The carbon fibers reinforce the low dust ceramic formula brake pad and strengthen brakes.
The rotors in this brake pad are created from the highly improved G3000 metallurgy, making them suitable for a bolt-on upgrade without making any modifications.
All components in the Power Stop K137 are engineered to work in partnership.
2. Bosch BC799 – Best Value Toyota Tacoma Brake pads
- Slots and Chamfers for Premium Quality
- Protective Transfer Layer
- Advanced Aerospace Alloy
- Rubber Core Multilayer Shim
- Synthetic Lubricant
Bosch is a well-known name in the world of brake pads.
As you would expect, Bosch BC799 uses the latest and finest inbuilt rubber core shims technology and original materials that offer excellent quality.
This brake kit’s unique OE-style rubber core multilayer provides top quality, durable shims which help the brake make lesser noise, resist corrosion, and enhance strength.
It is fully fitted with a lubricant and hardware to do an overall brake job regularly. Bosch BC799 is also durable and can last for a long time, just like most Bosch products.
This product is ideal for different Asian, Domestic, and European SUVs, Light Trucks, and automobiles.
Bosch BC799 features an aluminum-based alloy used in the semi-metallic and patented copper-free ceramic friction formula to make the brake pads lightweight and provide resistance to corrosion.
There’s a protective transfer layer on the surface of the rotor and pad that enhances and stretches the lifespan of the rotor and pad.
This brake pad also comes with a Quietcast kit that contains all the information you will need to apply the brake pads in the right way.
3. Wagner Quickstop ZD976 – Best Aftermarket Brake pads
- Wagner OE25 zero-copper friction formulation
- Premium Stainless-Steel Hardware
- OE-Style Lubricants
- Application-Specific Chamfers
- Shims and Slots
Wagner Quickstop ZD976 is built to enhance brake performance by making them function like new brakes.
The brake pad is made up of a 100% post-cure process that ensures there’s an even performance all through the lifespan of the brake pad, and it is designed to reduce the vibrations that lead to noise.
This brake kit is engineered to give consistency in braking and is fashioned to suit the specific needs of every vehicle.
It is also fitted with stainless OE-style lubricant and steel hardware for use in most vehicles.
The combination of the Application Specific Chamfers, Slots, and Shims helps in the reduction of noise-causing vibration.
There’s premium stainless-steel hardware specifically for selected applications.
4. Power Stop K137-36 Brake Pads
- Drilled and Slotted Rotors
- Dust-Free braking performance
- Z36 Carbon-Fiber Ceramic Formula
- Premium Stainless-Steel Shims
- Bolt-On Upgrade
Our pick for the best brake pad for Toyota Tacoma is Power Stop K137-36. Power stop has built a reputation for consistency in delivering brake pads of the highest quality.
So, if you want to haul loads, towboats, and lift trucks, this brake kit is ideal for you, as it offers the outstanding stopping power required.
Power Stop K137-36 contains a brake rotor drilled to regulate temperature during intense braking and slotted to remove any debris for consistent pad contact.
The combination of the Z36 Carbon-Ceramic performance friction formulation makes it possible to push rigs to the limit.
Additionally, there are perfectly matched braking components created to bring about much-needed brake torque due to increased load or wheel diameter.
The brake rotors in this kit are zinc plated to protect the brake from rust. Pad, Brake Rotor, and the hardware work together to bring about effective braking on vehicles with large loads.
Also, the dual-layer high-temperature rubberized shims serve as Noise Insulators leading to silent braking.
A combination of the drilled and slotted rotors reduces heat while the intense Tow and Truck brake pads supply the additional power required to halt the hauler swiftly.
This brake kit is designed to improve the general braking of your vehicle and make it easier to drive through hilly terrains.
This brake pad is an ideal alternative to consider if you want to get rid of dust, as it uses carbon fiber pads that contain dust-free formulation.
Not only that, but these power stop-tested pads also help in boosting the possibility of noise-free braking. These pads are Slotted, Drilled, and Plated to perfection.
It consists of a precision drill and Bolt-on upgrade made from the finest G3000 metallurgy with strict OE tolerances. The plating of this brake pad helps in reducing corrosion and rust.
5. Bosch BP976 Brake Pads
- Slots and Chamfers.
- Protective Transfer Layer
- Advanced Aerospace Alloy
- Rubber Core Multilayer
A fully functional brake is required when you drive for safety reasons. And that is what you get when you use Bosch BP976. This brake kit is designed to help brakes perform at an optimum level without making noise.
It comes with slots and chamfers that provide the function, fit, and high-quality effects on the brake. Bosch BP976 also has an inbuilt brake lubricant that helps with the full brake job.
Rubber Core Multilayer shims help the brake perform quietly by serving as insulation against noise and strengthening the brakes.
The engineering in this kit aims to use specific premium materials to ensure that brakes perform with outstanding stopping power, low dust, and less noise.
6. Akebono – Act976 Brake Pads
- Vehicle-Optimized Formulation
- Pro-ACT Ceramic Formulation
- Popular Aluminum
- Open Wheel Design
- Ultra-Premium Brakes
Akebono – Act976 is built to meet Original Equipment (OE) standards. This premium ceramic brake pad gives the ultimate experience required for brakes that suits many drivers.
It comes with a vehicle-optimized friction formulation intended to eliminate harshness, noise, and vibrations while also restricting the presence of wheel dust.
This leads to an increase in smooth braking events and enhanced durability. It is a great replacement to consider for the restoration of OE ceramic pad performance and conventional pad upgrade.
7. AC Delco 14D976CH Brake Pads
- Basic Shims
- Slots and Chamfers
- Hardware Clip Kits
- Retaining Pins
- Wire Retaining Springs
AC Delco Silver 14D976CH is a valuable and quality option for motor vehicles in general.
This AC Delco brake pad possesses a ceramic formulation that uses a lesser amount of metal, provides a low dust combination, and excellent braking power.
A combination of organic, safety metallic, and ceramic formulas makes this pad a safe and reliable option for many vehicles.
The chamfers, slots, and basics shim are responsible for braking harshness, reducing vibration, and lessening the noise. AC Delco Silver 14D976CH is a standard alternative to opt for.
8. Detroit Axle Ceramic Brake Pads
- 12 oz Brake Fluid Bottle
- 10 oz Brake Cleaner Spray
- 2x Front Ceramic Brake Pads
- Includes Hardware
- Brake Lubricant
Detroit Axle is one of the top retailers and distributors of new and reconstructed aftermarkets motor parts globally. This Detroit Axle Front Ceramic Brake Pad is created to provide drivers with incredible value.
This premium ceramic brake pad is built to provide a quiet, long-lasting, and smooth stopping experience. It is an improvement on the generally known metallic pads.
This brake kit has passed through wear and tear, fatigue, and impact testing to ensure durability and quality. It is a good fit for Toyota Tacoma and Toyota 4Runner.
9. Genuine Toyota 04465-04070 Brake Pads
- Authentic OEM Factory Part
- Top Quality
- No Aftermarket Part
- Ideal Fit
If your vehicle needs an authentic OEM Toyota accessory and part, Toyota 04465-04070 is the ideal fit — especially if you drive a Toyota Tacoma.
This brake pad is built to last for a long time. It is also affordable and reliable. Genuine Toyota 04465-04070 has an authentic OEM factory part and fits into your vehicle perfectly.
Note that it is not an aftermarket part. This brake pad is noise-free, dust-free, and has excellent stopping power.
10. EBC Brake Kits DP 71657 7000
- Lowest Dust Truck and SUV Pad
- Heavy-Duty Materials
- Easy On Rotors
- Green Powder Coating
- Triple Layer Wolverine Shims
EBC Brakes DP 71657 7000 helps you to eliminate up to 80% of brake dust. With this latest heavy-duty brake pad, you can rest assured to get a long-lasting and highly effective brake.
This EBC Brake pad is produced using the EBC 7000 series fiber. This makes it possible to enhance the stopping capacity of your brakes while producing less dust.
The slotted construction, chamfered, and new triple layer wolverine shims ensure the braking is completely quiet. The coating for the New EBC brakes applied on the pad gives room for quick pad bed-in.
Things to Consider Before Buying a Brake Pad
It is a well-known fact that brake pads are one of the most replaced motor parts. And the reason is as clear as day — brakes are known as the safety pedals.
This implies that brakes are the pedal responsible for the general safety of the driver and the car.
It takes little to nothing to step on the accelerator and watch how the speedometer measures your increasing speed rate.
However, in the face of imminent danger, you need the brakes to be in top condition to respond after it is stepped on.
This is where brake pads come into the picture. Brake Pads provide the necessary friction that helps bring your vehicle to a halt once in contact with the brake disc.
Simply put, brake pads make it easier for brakes to perform to the optimum.
So, what do you do when you notice your brake pads are worn out? Make plans to get a replacement, right?
No doubt, making plans to buy a brake pad is the first step required to boost the performance of your vehicles’ brakes.
And you have to make the right choice because these brake pads go a long way in determining your safety while driving.
However, the problem lies in finding the ideal fit for the vehicle that will be both durable and effective.
With this in mind, we have provided you with a detailed explanation of what you should consider before taking the step to buy a brake pad. Take a look!
Types of Brake Pads
You must possess a good knowledge of the types of Brake Pads on the market before making a rushed decision to purchase one.
This will give you an idea of the type that’s suitable for your vehicle. That said, there are 4 significant types of brake pads on the market. Let’s take you through these types.
1. Ceramic Brake Pads
Based on our research, these are the most efficient brake pads available right now.
As the name implies, these high-quality brake pads are made up of generally ceramic fibers. They are mostly tidy and noise-free while causing less damage to the rotors.
The downside to this type of brake pad is that they are on the high side — it is costly.
2. Low Metallic NAO Brake Pads
These brake pads comprise an organic formula with a little metallic mixture, including steel and copper, which helps break speeds and transfer heat.
These low metallic pads are powerfully functional, but metals in their composition make them likely to generate more dust and noise.
3. Non-Asbestos Organic (NAO) Brake Pads
These brake pads consist of fibrous materials, including glass, carbon, and rubber.
They are designed to be quiet brake pads alternative, as they are soft. However, they are likely to produce more dust and wear out fast.
4. Semi-Metallic Brake Pads
Semi-Metallic brake pads are created using at least 35% metal but not more than 65% metal — including steel, copper, and iron — and a lubricant made from graphite.
Brake pads of this make last for an extended period and provide outstanding transfer of heat.
The disadvantage of using this brake pad is that it leads to rotor damage, more noise, and a low-performance level when the weather is cold.
If you still have issues identifying which type of brake pad is the best fit for your vehicle, we advise you to consult an individual with expertise in brake pads.
The Brake Pad Your Vehicle Needs
It is one thing to know the different brake pads and another to recognize the ideal brake pad for your vehicle.
When choosing the right brake pad for your vehicle, there are certain factors you mustn’t turn a blind eye to — one of which is the type of vehicle you drive.
As a matter of fact, it is the major factor needed to find the ideal brake that fits just right. Below are the characteristics of vehicles that can be used as a guide in choosing a brake pad.
1. Heavy-Duty Vehicles
These kinds of vehicles are designed to handle large loads, which means they are bigger in size and require a braking power boost.
For this category of vehicles, we recommend that you use a semi-metallic pad. The higher the amount of metal, the better the braking. Note that semi-metallic are noisy.
Nonetheless, they are the best fit for these vehicles.
2. High Acceleration Vehicles
Cars that much at a swift pace and have highly responsive accelerators should also have brakes that respond swiftly to help with deceleration.
Based on this, we recommend that you opt for a high-performance ceramic brake pad to provide the much-needed stopping power.
3. Cars of Medium Size
The ideal fit for these types of cars is the low metallic NAO. Although it is a bit noisy, it does the job of power stopping effectively.
The more expensive option will be the Ceramic pads which also do a great job for these vehicles.
4. Light Cars
These kinds of cars require little force to bring them to a halt. If you own light or compact vehicle, an organic brake pad is exactly what you need.
Not only does this pad produce little noise, but also it is affordable. The downside to this type of brake pad is the likelihood of brake dust building up. Besides that, it is a solid option to consider.
How Does A Brake Pad Function?
A brake pad is an essential component of the braking system in a vehicle. Its primary function is to provide friction to slow down or stop the wheels of a vehicle when the brakes are applied.
When the driver presses on the brake pedal, hydraulic pressure is generated, which activates the caliper to press the brake pad against the rotor, creating friction that slows down or stops the wheel’s rotation.
The brake pad itself consists of a metal backing plate and a friction material. The backing plate is designed to fit into the caliper, while the friction material is in contact with the rotor.
The friction material is usually made of a composite material containing different combinations of organic, metallic, or ceramic materials. These materials are carefully selected to provide the best balance between stopping power, durability, and noise reduction.
As the brake pad wears down over time, the thickness of the friction material decreases, making it less effective at stopping the vehicle. For this reason, it’s important to regularly inspect the brake pads and replace them when necessary to ensure optimal braking performance and safety.
How Do I Make the Right Brake Pad Choice?
Making the right brake pad choice is essential because your safety while driving depends on this.
Having said that, choosing the best pad for your vehicle can be simple is know what to look out for on the market.
Here’s a fact: When choosing the ideal brake pad, getting the most expensive available doesn’t mean you got the best deal to solve your vehicle’s brake problem.
There some factors that you must consider before choosing a brake pad. They include:
- The activities you use the vehicle for
- The weight of your car
- Can the brake pad perform in all climate or weather conditions?
- Can the brake pad provide the much-needed friction?
- The maximum operating temperature of the brake pad
- The brake pads’ friction response to temperature
- The rotor and pad lifespan
- How much noise does the brake pad make?
- How much dust does the brake pad create?
If you consider these key suggestions, finding the best brake pad for your vehicle becomes easier.
It has to be said that there are certain situations where the most effective brake pads for your vehicle may be a noisy and dust-generating option.
What is the Lifespan of a Brake Pad?
The lifespan of a brake pad can vary depending on several factors, including driving habits, road conditions, and the type of brake pad being used. Generally, brake pads can last anywhere from 25,000 to 70,000 miles. However, it’s essential to note that this is only an estimate, and brake pads may wear out faster or last longer than expected.
Factors that can affect the lifespan of brake pads include:
- Driving Habits – Aggressive driving, frequent braking, and driving in stop-and-go traffic can wear out brake pads faster.
- Road Conditions – Driving on hilly terrain or rough roads can put more strain on the brake pads and cause them to wear out faster.
- Type of Brake Pad – There are various types of brake pads available, including ceramic, metallic, and organic brake pads. Ceramic and organic brake pads tend to last longer than metallic brake pads.
- Quality of Brake Pad – The quality of the brake pad can also affect its lifespan. High-quality brake pads are likely to last longer than low-quality brake pads.
It’s essential to have the brake pads checked regularly by a mechanic to ensure they are in good condition. If the brake pads are worn out, they should be replaced promptly to avoid any safety risks while driving.
How Frequently Should I Replace My Old Brake Pads with New Ones?
Like shoes, you need to replace your brake pads before they get worn out completely to prevent emergencies.
Most automobile manufacturers advise that drivers replace their brake pads after completing 30,000 to 40,000 miles — around the same time you replace your car tires.
The combination of the tires and brakes is what makes stopping the vehicle possible. Some brake pads can last 70,000 miles or 100,000 miles, thanks to rotor wear and pad choice.
However, it is still best to replace them before they get worn out completely.
How Can I Tell When My Brake Pad Needs Replacement?
When using your brake pad, there are specific signs you should look out for. They serve as indicators that you need a brake pad replacement as soon as possible.
You don’t need an expert to help you do this; you can feel and listen to these signs yourself.
- Brake Pedal Pulses: Once you step on the brake pedal and you can feel the pulse, it indicates that you have a worn-out brake pad in need of replacement.
Although, in some cases, it may be a faulty ABS or bent brake rotor.
- Squealing Brakes: If you step on a brake pedal and you hear a heavy squeal, it’s an indicator that the pads have worn out too thin.
For specificity, you will notice a wear bar indicator making contact with the brake rotor when the brake pad experiences wear beyond 80%.
After observing this, if you don’t get new brake pads to replace these old ones, the wear bar indicator will eat deeper into the rotor.
This means that you may ultimately have to replace both the brake pad and the rotor if you delay getting a brake pad replacement.
In a nutshell, you should not underestimate the essence of a brake pad in any vehicle.
Getting the right brake pad for your vehicle plays a massive role in providing you with the smooth and enjoyable driving experience you crave.
Our selection above some of the tested and highly functional brake pads that can serve any Toyota Tacoma owner effectively is what you need.