Difference Between 285 and 295 Tires in 2024- Which is Right for You?

tires 285-295

Before you know the difference between 285 and 295 tires, there are certain basic things that you need to know first.

Tires are round, hexagonally parts that surround a vehicle’s wheels and transfer the vehicle’s weight from the axle to the ground while also providing traction on the road surface.

Mechanically,  tires, like those on cars and trucks, are versatile padding that consumes shock when the tire travels over bumpy roads.

In addition, a footprint known as the “contact patch” for a vehicle’s weight to be matched with the intensity of the surface it turns.

This article explains the differences between 285 and 295  tires so that automobile owners can decide.

Vehicles Wise Difference Between 285 and 295 Tires

285_75r16 Falken Wildpeaks AT3

As a result, I will judge which vehicle makes use of 285 tires and which uses 295 tires. Continue reading!

The following vehicles may be equipped with the 285 tires:

  • Nisan Armada (2004-2007)
  • Ram 1500 (2015-2018)
  • Toyota Tundra (2007-2013)

On the other hand, the following vehicles may be equipped with the 295 tires:

  • Aston Martin DB11 (2016-2021)
  • Aston Martin Rapide  (2010-2013)
  • Aston Martin AMR Rapids  (2018-2020)
  • Aston Martin Rapides (2013-2019)
  • Aston Martin   Vanquish S  (2004-2007)
  • Aston Martin  Vantage (2018-2022)
  • BMW Alpina B7  (2016-2021)
  • Ferrari 458 Italia (2009-2015)
  • Ferrari 458 Spider (2011-2015)
  • Ferrari FF (2011-2017)
  • Ferrari GTC4Lusso (2016-2020)
  • Mercedes-Benz AMG GT 4 (2018-2021)
  • Mercedes-Benz SLS-Class AMG (2013-2015)
  • Porsche 911 (2018-2021)
  • Porsche Panamera (2009-2016)
  • Maserati GranCabrio (2010-2017)
  • Maserati GranCabrio MC (2013-2019)
  • Maserati Sport GranCabrio (2011-2019)
  • Maserati GranTurismo (2007-2016)
  • Maserati  M.C. GranTurismo (2011-2019)
  • Maserati GTSport (2012-2019)
  • McLaren Artura (2024)

The above demonstrates which tires go on which vehicle in this regard. So, we’re now at the point where we need to think about tire size and measure it.

Tire Size Reading

Where you drive and how you drive to influence the size of your vehicle, truck, or trailer.

There are usually placards on the driver’s side door. I am telling you what size original equipment tires your car has. Millimeters and inches are used interchangeably on the outer edge.

In this article, I’ll explain what all of those numbers on the side of the tires mean and how to interpret them:

01. Tire size and category

Passenger car tires are represented by the letter P. The vehicles that use P-class tires are portable sedans, portable SUVs, crossovers, minivans, and utility vehicles, among other things.

Transport trucks (LT) are vehicles with the capability of pulling trailers and transporting loading.

02. Width Of Tires

If you look at the tire head-on, you will see a three-digit number that represents the tire’s width in millimeters. Category width is another name for this measurement.

03. Rate Of Aspectual Modification

The front line distinguishes the multiple ratios out from tire size percentage.

04. Type of construction

Directional tires are the global standard for the majority of today’s tires. They outperform traditional tires in terms of traction on the road, rolling resistance, and ride comfort.

Normal tires, also known as multi or cross-ply tires, are designated by the letter.

Available Different Tire Sizes

285 Tires on Tacoma

Before making a purchase, you may want to compare tire sizes. You may not be aware of what the difference is between the numbers 285, and 295. What about the numbers 265 and 275?

That is dependent on several factors. In terms of comprehending what size tire you need, measuring tire sizes can be a little difficult to grasp.

The most common tire sizes are as follows:

  • 33 Inch Tires
  • 35 Inch Tires
  • 37 Inch Tire
  • 275/70R18
  • 285/75R16
  • 285/70R17
  • 275/60R20
  • 295/75R16
  • 295/75R17

It is, therefore, more convenient to examine the characteristics and specifications of 285 and 295 tires, which have would be described below.

Features & Specifications of 285 tires

Nitto Terra Grappler G2 285-70R17 116T

Tires with a radius of 31.5″, a segment width of 11.2″, as well as a tire size of 18″ are designated as 285/60R18. It has a rim of 98.8 inches and a rotational speed of 641 uprisings per kilometer.

In most cases, they are authorized for mounting on a vehicle that is 8-10″ large.

Features & Specifications of 295 tires

Mastercraft Avenger G-T Performance Radial Tire - 295-50R15 105S

Tires with a radius of 34.3 inches, a segment width of 11.6 inches, and an outside radius of 18 inches are designated as 295/70R18 tires and are used on 18-inch rotation.

Its perimeter is 107.6 inches, and it rotates at a rate of 589 uprisings per kilometer. In most cases, they are authorized for mounting on tires that are 7.5-10″ large.

I will also demonstrate some of the differences between 285 and 295 tires based on the specifications provided. Please continue reading!

Common Difference Between 285 and 295 Tires

295 tires

Between 285 and 295 tires, there are several differences to be aware of:

01. Weight

What is the average weight of a tire? It all comes down to what kind of tire you want and how big your car is.

Tire sidewall intensity decreases cause a reduction in tire weight, so remember that when shopping for tires. Tires weigh a lot because they’re made of thick rubber and need to have a lot of traction on and off the highway.

The vehicle needs to be stable and safe when it’s being used. Furthermore, the 285 tire is a  little smaller than 33 inches wide, whereas the 295 measures 33.3 inches in radius.

There is a.1-inch variation in thickness, therefore there is no difference.

02. Gas mileage

The mileage of both 285 and 295 tires is low. The vehicle’s speedometer will understate its mileage because those tires have a bigger radius.

In addition, it will end up going further than originally planned. Its mpg estimation will be messed up as a result. The mpg figure of the two categories will be lower, but it will be off by a small amount.

03. Carloads

Carloads depend on the rim of 285 and 295 vehicle tires. Given this, ply evaluation, level of functioning, and load range are used to calculate tire load capacity.

For instance, 285 tire carload is 1119.92 kg, while that of 295 is 1179.79 kg. Finally, to determine how much weight a tire can support, you must know how much air it can hold.

As a result, if you want a higher tire carrying capacity, you’ll need a bigger tire like 285 and 295 for your carloads.

04. Stability

Using 285 and 295 tires has some advantages. A taller tire offers superior road track stability.

A stronger and taller tire sidewall also prevents the inside of the contact area from drowning when under severe turning forces. Furthermore, rather than floating on top of a swampy path, the tire would prefer to dig deep until it found traction.

To minimize trail destruction, it will easily use a light, smooth throttle setting, or simply turn around and avoid a drenching.

05. Appearance

Cooper STT Pro Tire 295_70r17 Gladiator JT Jeep

285 and 295 tires with large diameters have a great appearance. Having wide, oversized tires on your vehicle has become somewhat fashionable among many car or truck drivers.

A set of gigantic tires is a good option for a car that will only be used for cruising around town.

06. Rolling Resistance

285 and 295 tires have higher rolling resistance on enhanced and unmodified surfaces, resulting in lower fuel efficiency and effectiveness.

Using the illustrations below,  I would like to demonstrate the difference in size between a sidewall with a radius of 285/65 R17 and the other with a radius of 295/65R18.

If indeed, the difference between the two tires is significant. These same tires are compared in the table based on the following characteristics: as a whole radius, segment width, diameter, etc.

Measurement 285/75-16 295/75-16 Difference
Inches (mm) 32.83 (833.9) 33.42 (848.9) 0.59 (15)
Radius (mm) 11.22 (285) 11.61 (295) 0.39 (10)
Centimeters (mm) 103.14 (2619.77) 105 (2666.9) 1.86 (47.12)
Surface Thickness (mm) 8.42 (213.75) 8.71 (221.25) 0.3 (7.5)
Per-mile rotations (km) 614.31 (381.71) 603.45 (374.97) -10.85 (-6.74)


Pros & Cons of 285 & 295 tires

  • When you look at the tire numbers, it’s easy to recognize the fundamental technical concept behind the 285 and 295 models. Water- and dust-resistant tires were used on the project.
  • A compact size, wide-width performance tire allows a wider track as well as less tire deflection. When a tire deflects under cornering loads and lifts a portion of the inside tread, the road surface loses traction due to the obvious change in camber.
  • A 33×12.5 all-terrain tire disperses vehicle strength over a larger surface, outperforming its measurement on soft ground like thick mud, snow, as well as soil (285/75 R16 or 295/75R16).
  • The more conversion a tire generates the less the sand all of this displaces under acceleration, the better it performs in the sand.
  • Wide tires have several drawbacks, which are mostly the exact opposite of the advantages of narrow tires.
  • Wider tires are much more challenging to speed up and stop because of the increased tire wear they create on the road.


Typical Questions Related to the Difference Between 285 and 295 Tires

Cooper STT Pro Tire 295_70r17 Gladiator

How much wider are 295 tires than 285 tires?

The only distinction between the two is the overall circumference, with the 285 measurings a little less than 33″ and also the 295 at 33.3″.

There is a one-inch variation in breadth, thus there is no variation therein.

What tire is taller than 285?

The number 305 indicates that it is taller than the number 285. The 75R rating determines the tire’s height. A 305/70R tire is required to be the same width as a 285/75R.

For example, a 305/50R16 tire measures 28 inches tall, whereas a 305/85R16 tire measures 36.4 inches high.

In the same model tire, a 285 will typically be around 33×11 and a 305 would typically be approximately 33×12.

What is the height of a 295 tire?

295/75R16 tires with a width of 33.4″, a segment height of 11.6″, and a rim size of 16″ are used in this application.

The circle is 104.9 inches, and they rotate at a rate of 604 rotations per mile. In most cases, they are authorized for mounting on wheels that are 7.5-9.5″ broad.

Are 33s and 295s the same thing?

That is d the 33×12.5 is somewhat larger than 32″ when installed.

What is it about 285 tires that makes them so expensive?

With stronger edges and a wider footprint, these tires are more durable. The 275/60/20 tire has a P measurement size designation.

Light-duty tires with a shallower tread depth are intended for expressway use and are built for light-duty use. As a result, the 285 has become more expensive.

Are 285 and 33 tires the same thing?

The 285 tire does have a width of 32.832″ whereas the 33″ tire has a width of 32.832″.

As a result, because there is no typical pattern in the business world, the actual diameter varies from one supplier to the next in the sector.

As a result, the 285/75/16 is widely regarded as the standard size for 33″ that is widely accepted around the world.

Which vehicles typically use 285 tires?

Some vehicles that are commonly equipped with 285 tires include the Nissan Armada (2004-2007), Ram 1500 (2015-2018), and Toyota Tundra (2007-2013).

Which vehicles typically use 295 tires?

Some vehicles that are commonly equipped with 295 tires include the Aston Martin DB11 (2016-2021), Ferrari 458 Italia (2009-2015), Porsche 911 (2018-2021), and McLaren Artura (2024).

Are there any advantages to using 285 or 295 tires?

Using 285 or 295 tires can provide certain advantages depending on the vehicle and driving conditions. For example, wider tires can offer improved stability and traction, especially on uneven or slippery surfaces. However, there can also be disadvantages, such as decreased fuel efficiency and increased tire wear.

How do I know which tire size is right for my vehicle?

The recommended tire size for your vehicle can typically be found in your vehicle’s owner manual or on the tire placard located on the driver’s side door jamb. It’s important to choose the correct tire size to ensure optimal performance and safety. If you’re unsure which tire size to choose, consult a tire professional or your vehicle’s manufacturer.

Can I use 285 tires instead of 295 tires or vice versa?

While it is technically possible to use a different tire size than what is recommended for your vehicle, it is generally not recommended. This is because using the wrong tire size can negatively impact your vehicle’s performance, handling, and safety. It’s best to stick to the tire size recommended by the manufacturer.


Global tire manufacturers are currently designing and researching all types of tires to meet the demands of people, which they then fabricate.

The difference between 285 and 295 tires has also brought about enlightenment on how to get the best for their cars, trucks, and any other available vehicle they have or use. When choosing your choice of tire, choose quality tires.

Finally, some YouTube videos can be watched to better understand the key differences between 285 and 295 tire sizes. To learn more, please visit the websites listed below.

About Us

Our story is one of passion, commitment, and a relentless pursuit of automotive excellence. Join us on this journey, where every detail is…